Bridge movement is measured with every passing train and data is transferred to a Gantner Cloud system via 4G modem. In the case of unwanted bridge movement, an alarm is generated and the Railway Operations Center is notified by Email. For every passing train, data is acquired at 500Hz with high resolution to ensure precise measurement of bridge movements for further evaluation.
The challenge was the tight schedule to provide a solution with no possibility to power the measurement system from any local grid. In combination with the demand to generate fast and precise measurement data with every passing train, the power supply system had to be designed with great care. After analysis of the local region’s weather data from the past 5 years, two solar panels were selected along with a high-quality Lithium-Ion battery. This carefully selected combination of products guarantees several days of measurement autonomy, even under harsh environmental conditions including low temperature and solar radiation during the winter season.
The entire process from first customer interaction to the installation and commissioning of the off-grid measurement system took only 3 months. Gantner Instruments was responsible for the complete system design of the measurement cabinet as well as the simulation and design of the solar powered off-grid system. After 2 weeks of full-scale testing at Gantner Instruments’ headquarters located in Schruns, the complete measurement system was delivered on-site.
Thanks to close cooperation with the customer during all project phases, both the installation and commissioning of the complete measurement system were executed within one day. With the Gantner Cloud system now in operation, data is collected with every passing train while live measurement values and system status information is accessible for railway crew with just a few mouse clicks. With a web browser-based fleet monitoring system such as the Gantner Cloud, it is possible to manage any number of constructions, regardless if on-site grid power is available.
More articles
33nd Dresden Bridge Building Symposium 2024
We are thrilled to announce the 33nd Dresden Bridge Construction Symposium (DBBS), set to take place on March 13th/14th, 2024
Read more...Q.series interface with the Moog Aerospace Test Controller
The amount of data generated in an aircraft structural test program continues to grow. The density of load introduction points (actuators) and sensors (strain gauges, thermocouples, LVDTs) on a test article is increasing progressively and model validation requires higher data sample rates to capture more detail. The risks and costs involved in aircraft validation and certification are significant, and the requirement for quick entry-into-service is high. To minimize the impact of retrofitting in-service aircrafts, the ability to generate test results quickly is crucial to the success of a test program.
Read more...Q.series X A192
The Multifunction Module when Flexibility and the Highest Performance Matters Most
Read more...Long term Volcano Monitoring – A field study
Monitoring volcano activity is an important issue in the mitigation of natural hazards. Recently, most fatal issues occurred on volcanoes with low-energy and moderate activity, making them attractive touristic places (e.g., the 2014 Mount Ontake eruption in Japan). For these types of volcanoes, monitoring involves multiphysics measurements on dense networks. Distributed networks of sensors must be easily adapted to the volcano’s evolving state and the appearance of new active areas like fumaroles or high heat flux in the soil.
Read more...